Long ago when Mantic first released their ghoul models, they sent a sprue to me as a sample. The ghouls were of high quality, except 3 of the 4 base hands on the models had broken fingers. It didn't bother me as there was a variety of other hands that could be glued on in their place if one cut off the base hands and they were shipped to me in a bubble envelope from the UK.
Fast forward to end of June. A couple of friends and I placed an order for a number of Mantic models. We ordered one of the Morgoth's Revenge sets and a box of Orc Axes. I received this order about a week ago now. My part of the set was the undead, while the dwarves went to one friend and the orcs to another. After assembling a couple of the models from the sprues I hadn't seen before (Skeletons, Revenants, Zombies), I would recommend them for anyone looking for cheaper alternatives to GW undead. They're at least as detailed as the GW skeleton plastics, though much less customizable.
The Mantic skeletons vary from 2 piece to 6 pieces per model (excluding details like pouches), with a large number being in the 2 or 3 piece range, the parts on the command sprue half have the largest variety. The Skeleton and Revenant sprues are also interesting in that they're designed as sprue halves. There is a base skeleton half, a base Revenant half, a line trooper half and a command half. Any individual sprue will have either the Revenant or Skeleton half with the other side being the line trooper or command half. The 4 sprues that came with Morgoth's revenge had one of each combo, giving me 2 of each type of sprue half. (I wish I'd taken pictures before cutting everything off the sprues.) There is a total of only 4 unique legs, 2 with chainmail, 2 with rags, meaning that from the waist down there will be little variability. The upper torsos however appear to each be unique (so 5 unique torsos per sprue half). They are extremely close in scale to the newer GW skeletons, and I've already assembled a mantic body with a GW sword arm, only a little GS is required to fill the cavity the GW arm has for the connector nob that doesn't exist on the Mantic model.
The ghouls seem to just have a problem with shipping, of the 5 sprues that came in the set (totaling 20 open hands), 11 of the open hands had 1 or more broken fingers. As there are only 2 ghouls per sprue (though they do have separate torsos and legs), with 3 head options and 3 replacement hands, there isn't much in the vary of variation if many of them are fielded, expecially when over half their basic/open hands are broken. I'll probably try mixing them with the zombies for variation.
Which brings me to the Zombies themselves, which while look nice on the sprue have some of the strongest criticisms from me. They come 3 models to a sprue, (2x torsos + arm, 1x torso + 2 arms), with 6 head options and 3 arm options for the 2 torsos with only 1 arm molded on. it also comes with a spine and pile of organs with looks like it should slot into a set of legs, and a base that looks like it can slot a torso missing legs and trailing guts. This could potentially bring the models up to 4 zombies per sprue. There are 2 major problems with the zombies. First, the torsos and legs do not fit together well at all. They're going to require quite a bit of gap filling to fix the poor looking connections. The second is how the heads connect to the torsos. with the flat connection there is little in the way of posing the head, and this is most noticeable on the torso with 2 arms as any head attached looks like it's staring up at the 2nd or 3rd story of a building. The neck would work alright if the torso was placed almost horizontal on the ground, but not even the legless base positions the torso that far down. An interesting aside, is a arm holding a head. I only counted it as a arm as I was unable to fit it on any of the torsos at any angle to have it look right as a zombie holding it's own head (either still attached to the body or truly floating free). With some conversion it can be made to work, but I'm not sure how many people can sculpt good looking severed necks (never tried it myself).
All in all the models are pretty good, and i do recommend them for anyone looking for yet more undead to add to their force. It's kind of a cruel irony that the Zombies are the worst of the bunch as they had the most cross-game utility in my book. All the models (except the Zombies) go together quickly so assembling a large force in limited time should not be a problem. So far the best part of the entire undead range, in my opinion, is the Undead Giant Rats (Dogs?) models (that is the official title for them too).
About the image: The back 2 models are Skeleton/Revenants. The one on the left has the GW sword arm. The middle 3 models are the Zombies, which look nice, but don't go together too well. The blurry front most models are the Ghouls. the dog sized undead critters are the Undead Giant Rats (Dogs?).
She is pieced together from both a regular XV8 Crisis Suit and a Forgeworld XV88-2. I liked how the Forgeworld Broadside weapons look, and after inadvertently learning they could be easily mounted on the backpack mounts of a normal suit (the connector bar for the arm slots right into the backpack groove), I couldn't get the image of the broadside Tauchikoma out of my head.
I started with the normal tauchikoma body and trimmed down the FW Broadside 'heatsinks' to glue to the normal backpack's jetpack arms, trimming down some of the nozzles. The space between the jetpack and heatsinks was filled with greenstuff. I left the bottom-most nozzle open, figuring it might be fired when the railguns fire to help stabilize.
I had to ponder for a while to place the second array of missiles, the first set was obvious in the space the normal tauchikoma carry their primary weapon system. I ended up attaching them to the 'screw' nubs on either side of the backpack where I suppose normal tauchikoma would have line launchers like in GitS. This should allow the existing line launcher power and control interface to fire off missiles without having to run any new control circuitry.
Looking over the pictures, there are resin bubbles in the railgun muzzle vent things. Those are going to be a pain to clean out >.<
As an interesting aside, I went hunting for the tau'chi'koma that were my inspiration, and while I believe I found the thread they were in; all the images have been removed. I recall there being a broadside or 2 in that set, but can't verify it or compare the 2 units. ;.;
Edit: Hahaha! Thanks #2501 for reminding me that you were the one! Here's his Tau'chikomas. Though this does lead me to wonder what the thread I found was... It's here by the way. Anyway his broadsides are quite a bit different then mine, but that's ideal. And my second one will look different from either as I don't have any more spare FW Broadside torsos (which is odd as I have another set of railguns >.> ).
Well, sorry I still don't have the tauchikoma up, I'm still adapting to the new job and haven't had the time to photograph miniatures.
In more upbeat miniature news, the Kings of War starter set arrived in the mail yesterday right before I went to work, so I'll have zombies and skeletons to assemble and finally have the mooks, sorry, 'henchmen' for my Mordheim warband, hopefully I'll find some time over the weekend to catch up on miniature related stuff.
Well, I'm thrilled, I placed second in the Gifts of MorkCharacter Competition. I wasn't really expecting to place higher then honorable mention if I was lucky. I will say congratulations to all the other winners of the contest, especially Dan1789 for being the Winner and Misty Rain (Honorable Mention: Rules) for doing a tribute to the Tau Guru Tael (and for doing a Tau entry at all). ^.^
I'm planning on finishing up my Tau army now that I've had interest in it rekindled (I think I burned myself out trying to assemble and paint it all at once.) And managed to assemble another Tauchikoma, this one outfitted as a counts-as Broadside. Expect pictures... probably Tuesday, depending on how my 4th of July day goes.
In unrelated information, I apologize for not having a post ready for Thursday. I was busy getting ready for a job interview and didn't do much miniature stuff anyway. Oh, I also now have a job.
WIP-REVIEW: More scenery for Robotech!
First update of this year!
I've been building the scenery sets from 4Ground I have so far:
Primera actualización del año!
He estado armando los sets de escen...